Qomo QD1600 User Manual

PRECAUTIONS Please follow these precautions: To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent electrical sho

signals from the computer、visualizer CCD and S-Video are going to the RGB1 input on the projector and will be displayed on the projector screen as RGB

connections shown below to control the visualizer from an external computer. USB connection enables capturing still images / video streams from the

B. Click , you will see the following setup window: C. Click and select , you will see the following setup window: D. Click , then copy files

E. Click to finish the setup. F. Shut down your computer when prompted, so the changes will take effect. * Please pay attention to the fo

WORKING ON THE STAGE 1. Place your material on the working surface. 2. Select the enlargement required with the “+T” and “W” keys. 3. Adjust the fo

ADJUSTING IMAGE SIZE In order to reduce or enlarge the image size displayed on the screen, press the “+T” or “W” button. WORKING WITH NEGATIVES The v

FREEZING IMAGE Press the “Frz” button to freeze the image. When the output signal is RGB, in order to show a still image on the screen, press the “Frz

SWITCHABLE RGB INPUTS Use the “CCD/PC1/PC2” button to switch between CCD and different RGB signals. Each time the “CCD/PC1/PC2” button is pressed, it

a certain distance to the unit. Objects situated between the visualizer and the infrared remote control and a weak battery may interfere with the rece

USB IMAGE CAPTURE You can capture and control images on the visualizer from a computer connected with a USB connector. A. Connect the computer and th

CONTENTS: PARTS IDENTIFICATION ... 3 CONTROL PANEL ...

CONTROLLING THE VISUALIZER FROM THE COMPUTER You can control the visualizer from a computer connected with a RS232 connector. A. Connect the comput

click “Projector” to select your projector model under the drop-down list, then click “Send”. If you can not find your particular projector model in t

c. If the data is in the numerical value and character format, then synthesize the above-mentioned formats. 3)．Once done, click “Add” to add your pr

Connect the Visualizer to a computer with a RS232 cable (Please disconnect the projector from the RS232 port first) and select the Baud Rate and Pari

CONTROLLING CAMERA BY MOUSE Connect the mouse to the visualizer.You can control the camera by mouse. The control menus’ operation is the same to the o

Cautions: a. Don’t lay the unit down flat. b. Don’t try to stand it on its rear or sides. c. Don’t try to pick up this unit by pull

SPECIFICATIONS Color system NTSC or PAL system Pickup device 1/3″CCD Resolution XGA (1024 x 768) Total Pixels 850,000 Lens 16 x optical zo

RGB DB15FLC (2) C Video OUT (RCA) (1) S Video OUT (4-pin DIN) (1) Output connectors Audio OUT (Mini Jack) (1) Operating system Windows XP SP2 (Serv

TECHNICAL SUPPORT How to Reach QOMO: By Phone Call us at 1-866-990QOMO. Our expert personnel provide technical assistance from 9:00AM through 5:0

CONTROLLING THE VISUALIZER FROM THE COMPUTER ... 20 CONTROLLING PROJECTOR BY VISUALIZER... 20

Save (Save captured images, can save up to 16 images) Far/Near (Focus far or near) Mem (Multiple Screen Display, the stored images will be displayed i

REMOTE CONTROL LAMPPOWERNEGATIVEEXITTEXT B&WSETBLUE BRIGHT SCROLLRED+-+-TELERUNAUTO NEARWIDEVIDEOVOL+FARVOL-PROJECTOR INPUT+-PRESETSAVE+ POWER (C

FAR/NEAR (Focus near or far) AUTO (To auto adjust brightness, auto white balance and auto focus) VOL+/- (Increase or decrease the volume) CCD/PC1/PC2

BASIC PREPARATIONS 1. Use one hand holds the base of the visualizer, use the other hand carefully lift up the camera stand of the unit. 2. Open the

Step 2: Connect to the projector. ProjectorRGB InputScreenRS232 CableAUDIO IN Rear PanelAUDIO OUTVIDEO S-VIDEOOUTVIDEO AUDIO INAUDIO INS-VIDEOOUT-12V-

RGB OutputTo the MonitorUSB ConnectorComputerRS232 CableSide PanelMIC USBRGB IN AUDIO INRS232S-VIDEORear PanelVIDEO AUDIO OUTINS-VIDEOOUTAUDIO AUDIO